Kitchenaid Refrigerator Not Cooling But Freezer Works. A refrigerator is a necessary part of a busy lifestyle, and if it is broken it can disrupt your entire schedule. A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer.
Additionally, if the motor is unusually noisy, replace it. Another issue could be with the condenser fan.
The Loft Set Designed For KitchenAid Appliances
Another possible cause of a kitchenaid refrigerator not cooling is a faulty start relay. Another possible problem is a bad evaporator fan motor, which circulates the air from the freezer to the refrigerator.
Kitchenaid Refrigerator Not Cooling But Freezer Works
Do you hear the fresh food evaporator fan motor running in your refrigerator section?Er5124788, model# ktrc19mmbl01, kitchenaid refrigerator,Every refrigerator contains a set of coils called an evaporator, which makes the inside of the fridge cold.For a solution, you have to.
For information on how to turn the refrigerator off and on, please see your.For the start relay, which is fixed to.From there, the keys on the touch pad become soft keys.Get shopping advice from experts, friends and the community!
Hello, we have a kitchenaid refrigerator, our freezer is working, but not the refrigerator in not.Here’s how to replace the thermistor:Hit the up or down arrows to go to.Hold the two buttons on the touch pad down on the left and wait for a 3,2,1 countdown.
I have a maytag plus refrigerator with a bottom drawer freezer;If everything works, the unit will shut down and 01 will appear on the display.If the evaporator fan is not working, the freezer or refrigerator will not cool adequately.If the fan blade does not turn freely, replace the fan motor.
If the fan blade does not turn freely, replace the fan motor.If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective.If the refrigerator is not cooling properly, check to make sure the refrigerator is turned on.If they don’t turn freely, the fan motor is bad.
If this occurs, the freezer may still get cold, while the refrigerator will not get cold.If this relay isn’t working, the compressor won’t run and temperatures will rise.If we turn on the max cool and adjust the fridge temperature from 4 to 0, then the bottom compartment will be frozen but the tempo for the rest part in the fridge is still high (15 celsius) and.If you are getting 12.7 volts dc then your.
If your freezer is working, but the fridge is warm, the air damper control may be stuck or broken,If your kitchenaid refrigerator is beeping but is not cooling, the fault is most likely the main control board.If your refrigerator or freezer is not cooling, your first instinct may be to buy a new model immediately.It’s not a defrost issue, a fan motor, a thermostat issue, or an overheating issue or anything like that.
It’s located on the control board.Lift off the light cover;One of the main reasons for fridge not cooling but freezer works is that the evaporator coils are not working in proper order.Open the doors of the refrigerator for a few minutes to raise the temperature.
Open the freezer door and remove the lower drawer and shelving;Some refrigerators need to be manually turned back on after a power outage or power surge.The air damper is located near the evaporator coils and fan system.The condenser fan motor draws air over the condenser coils to cool them.
The condenser fan motor is located underneath the refrigerator.The evaporator coils are filled with frost, so air doesn’t get space to pass through them to get cold.The evaporator fan motor draws cold air over the evaporator coils and circulates it throughout the freezer.The fan motor could be overheating shortly after it starts operating and thus, not circulating air.
The following are parts of the refrigerator to check if your kitchenaid refrigerator is not cooling or freezing:The freezer part works fine but the fridge is not cooling properly.The freezer works fine, the fan blowing air from the freezer to the fridge appears to work fine, but when i check to see if cold air is getting into the fridge there is no air flowing, it appears, from the bottom freezer unless i open the bottom freezer drawer at least a crack.The refrigerator could also accidentally be turned off during routine cleaning.
The start relay helps to start the compressor, and thus cool the refrigerator.The thermistor is a sensor that monitors air temperature.Then turn the fresh food control all the way off (warmest) and the freezer control all the way on (coldest).This means the freezer is not producing enough cold air to freeze the contents of the freezer, but there is enough cold air being made to cool the contents of the refrigerator section.
This problem is usually a result of a freon issue.This system works by opening and closing at specific times to allow cold air into the refrigerator and/or freezer.To determine if the evaporator fan motor is defective, try turning the fan blade by hand.To determine if the evaporator fan motor is defective, try turning the fan blade by hand.
Turn the blades of the condenser fan with your hand to know if the motor is faulty.When the fridge is not cold but the freezer is, the problem is probably tied to one of your refrigerator’s mechanisms not working as designed.When this part goes bad it can cause the fridge to stop cooling some or all together.Within ten seconds the damper should close off and both fans should be running as well as the compressor.
Yes, there is a damper that controls airflow into the refrigerator.You can test the start relay with a multimeter and replace it if necessary.You would need to order and replace the main control board on the back of your refrigerator if the unit is shutting down randomly so below is a link to the part and unfortunately it’s about $300.